"Affordable and sustainable homes"

     
Kitset Inclusions
  • Specifications are current as of 1st February 2014. Maybe subject to change.

Click here to download latest kitset pricing and specifications

Stage ONE Specifications (Frames & Exterior)

Wall Frames
Pre-cut and pre-nailed 90 x 45 treated timber framing OR 
90 x 40 galvanised steel framing
Trusses & Beams
Pre-cut and pre-nailed Roof Trusses with Producer Statement
Roof Colorsteel® long run roofing
(includes fixings, flashings and self supporting underlay)
Cladding options Smooth weatherboard or clay brick (All other claddings available on request. Additional charges may apply)
Cavity Battens
If applicable to plan
Fascia             
150 x 25 Pre-primed finger jointed pine
Soffit Linings
Hardisoffit and PVC jointers
Spouting Marley PVC gutters and down pipes
Windows       
Aluminium joinery with double glazing and paint quality jambs
Damp Proof Course 90mm and 150mm (Windows)
Building Wrap Synthetic breathable building wrap
Freight Freight is charged at $5.50 per Km from main NZ centres. Min. freight charge of $750 North Island and $1250 South Island. Freight for other areas priced on application.


Stage TWO Specifications (Interior Fitout)

Insulation Pink® Batts® R2.2 or R2.4wall. Pink® Batts® R3.2 or R3.6 ceiling
(Not applicable for garages) 
Kitchen                  Formica® square edge bench tops, Melteca® cabinets and doors with chrome handles. Supplied ready to assemble.
Kitchen Sink 1 1/4 bowl stainless steel sink insert.
Appliances             
Stainless steel hob (ceramic top standard) 
Stainless steel wall oven
Stainless steel dishwasher
Stainless steel 600mm rangehood
Exterior door/s Pre-hung unpainted entrance door and glazed aluminium rear door (if applicable to plan)
Interior doors Pre-hung paint quality flush MDF doors 
Door hardware Satin chrome lever handles and hinges
Ceiling battens    
Timber ceiling battens (if applicable to plan)
Interior linings GIB® to wall and ceilings. GIB® Aqualine® to bathroom.
Scotia                
Pine mouldings (wardrobes)
Skirting                
No. 20 finger jointed pine mouldings
Shelving                
MDF to wardrobes and dressed pine to HWC
Wardrobe rails        
Aluminium ‘S’ rails
Shower/s            
900mm x 900mm moulded shower with safety glass doors. Chrome waste.
Bathroom            
650-750mm wall hung vanity unit (2 dawers/2 doors and satin chrome bow handles) 
1675mmx765mm bath. 
Laundry tub          
Stainless ste
Plumbing            
Vitrous china dual-flush toilet. 
180l mains pressure hot water cylinder
Single lever mixers, bath spout and slide shower rose
Freight                
Freight is charged at $5.50 per Km from main NZ centres. Min. freight charge of $750 North Island and $1250 South Island. Freight for other areas priced on application.

Notes
 
Standard plans designed for up to High wind conditions, Corrosion zones 1-3 and Earthquake A standard. (Other conditions priced on request)

Please note the following items are not supplied with each kitset home:
    - Consent fees
    - Concrete slab or timber pile floors
    - Fixings, unless specified
    - Stopping and decorating materials
    - Plumbers hose, pipes, valves and traps
    - Electrical wiring and fittings
    - Garage door (if applicable to plan)
    - Floor coverings
    - Any other items not specifically stated above

 


0800 66 38 52